Zmax's recommended ProTee Interface settings

User avatar
Zmax
Posts: 5381
Joined: Thu Mar 05, 2015 4:02 pm
Location: Chicago

Zmax's recommended ProTee Interface settings

Postby Zmax » Sat Mar 14, 2015 2:33 pm

Zmax's recommended settings:

You can make changes to the settings file from the interface by holding down the keys ALT E to bring up the settings file editor.

Look for the following items and make the recommended changes.

All Club Speed set to default
All Club Spin set to default
All Ball speed set to default
All Drag set to default
All Lift set to default

SS_calculation=True
SS_Iron=0
SS_Driver=2
SS_Putter=0
SS_Wood=0

Puttingmat_angle_correction = 2

(Note: these worked for me. might be different for you)
Club_path_correction_Driver=-1
Club_path_correction_Wood=-2
Club_path_correction_Iron=-3
Club_path_correction_Wedge=-2
Club_face_correction_Driver=2
Club_face_correction_Wood=3
Club_face_correction_Iron=3
Club_face_correction_Wedge=4

Use_TBS=True
Spinrate_increase_factor_wedge_0_to_15=15
Spinrate_increase_factor_wedge_16_to_35=13
Spinrate_increase_factor_wedge_36_more=10

TGC penalty:
Green_bunker_decrease_factor= 40
All others are set to zero

ProTee 2.0 penalty:
Green_bunker_decrease_factor= 55
Green bunker_decrease_factor=55

V_cam_fallback=40
H_cam_fallback=40
Gear_effect_factor=-1

Investigate_V_cam_method_wedges=PT5
Investigate_V_cam_method_non_wedges=PT5
Investigate_H_cam_method=PT1
Investigate_V_cam_method_driver=PT5
Investigate_H_cam_method_driver=PT1

Number_of_iterations=35

Chipping_use_clubspeed=True
Pitching_use_clubspeed=True

Chipping_distance= 32M (35 yards)
Chipping_ballspeed_factor=50
Chipping_drag_factor=100
Chipping_minimum_launch_angle= 1

Pitching_distance=41M (45 yards)
Pitching_ballspeed_factor=85
Pitching_drag_factor=100
Pitching_minimum_launch_angle= 1

Max_HCam_diameter_correction_ball=7
Max_VCam_diameter_correction_ball=4
MaX1_HCam_diameter_correction_ball=7
MaX1_VCam_diameter_correction_ball=4

Spin_decrease_factor_irons_at_low_LA=10
Spin_decrease_factor_woods_at_low_LA=10
Spin_decrease_factor_drivers_at_low_LA=0
Spin_decrease_factor_wedges_at_low_LA=0
GC2 US CST
Site Admin

JNPG Simulator Winter Tour 18 (sim):
http://www.simulation.onlinegolftour.ne ... l?id=10041

OGT Simulator Tour Facebook:
https://www.facebook.com/OGTSimulatorTour/

Return to “Other Simulator Discussions”

Who is online

Users browsing this forum: No registered users and 2 guests

cron